Designed specifically for analytical chemistry, the body of the funnels is 60° . Moulded in PP, these funnels are provided with internal & external ribs to prevent air blockage.

Available in two different sizes, these Cages provide excellent shelter for different anial species in the laboratory. The metallic top provides proper ventilation and has provisins for feeding the species.

Adding in line with the existing range, these Animal Cages are provided with a Stainless Steel grill at the bottom of the cage to provide a clean surface for the species to move on.

Polylab Aspirator Bottles are made of Polypropylene and are therefore much lighter than glass. These are autoclavable, durable & dependable. The leakproof spigot screwed to the bottle body requires only a half turn to open or close. These bottles are used for storing or dispensing distilled water & other laboratory solutions. Threads should be totally disengaged before autoclaving.

These sets consist of moulded balls of different colours and sizes along with connecting lugs of different sizes. These sets are very helpful in modelling different organic & Inorganic compounds. SENIOR SET : This set consists of 150 lugs & 370 balls of prescribed colours and sizes packed in a moulded box having seperate space for every particular colour & size of ball. JUNIOR SET : This set consists of 30 connecting lugs and 75 balls of different colours and sizes.

These sets consist of moulded balls of different colours and sizes along with connectors of different sizes. The sizes & shapes of the balls & connecting lugs have been designed in accordance with internationally acceptable standards

Polylab Beakers, moulded in Polypropylene, have execellent clarity and very good chemical resistance. These autoclavable Beakers have prominently raised graduations on the outer surface. Pouring a solutions becomes very convenient because of its tapered spout.

Moulded in Polypropylene, these two piece funnels are light weight, easy to clean & autoclavable. The top portion can be snap fitted with the lower one forming a vaccum seal which does not require greasing. The base of the top portion has a perforated filter plate.

This Burette has a transparent acrylic body and a leakproof stopcock fitted with a self lubricating PTEE plug. Each Burette is individually calibrated to give maximum accuracy. Acrylic body is unaffected by dilute minerals acids & bases except Hydrofloric Acid & Ammonium Hydroxide. The pH range of 1-14 is deal and can be used upto 5% wt/wt of acids or 30% bases.

Polylab Carboys, made of polypropylene, are much lighter than glass. These autoclavable, dependable & durable Carboys are provided with wide handles making it convenient while carrying or pouring purposes

Adding in line of Polylab Aspirators, these polypropylene Carboys are autoclavable, dependable & durable. These are also equipped with a leak proof spigot screwed to teh body. These carboys. These carboys are in excellent replacement for glass carboys and are used for storing & dispensing distilled water & other laboratory solutions.

This autoclavable Polypropylene Tray has a unique feature i.e. its handle which proves really helpful in carrying reagents or laboratory apparatus from one place to another, single handedly.

This cell scraper, as the name suggests, provides an excellent option for cell scraping purposes in microbiology.

Polylab Centrifuge tubes with conical bottom are available in two sizes i.e. 15ml & 50ml. Moulded in polypropylene, these tubes are clear, strong and safe. These autoclavable tubes are provided with printed graduations on the outer surface. The built in seal ring in the cap makes these tubes absolutely leakproof. These tubes can withstand forces upto 7500xG & 12000xG for 15ml abd 50ml tubes respectively. These tubes are available sterilized as well as non-sterlized

Polylab Centrifuge Tubes with round bottom are moulded in Polypropylene & Polycarbonate. these tubes have excellent clarity and re strong enough to be used upto 50,000 x G. These tubes can be autoclaved, however, repeatd autoclaving in PC tubes reduces their mechanical

Made of Polypropylene, these cone shaped flasks are rigid, translucent & autoclavable. The screw cap keeps the contents of the flask contamination free and makes the flask leakproof. Threads should be disengaged before autoclaving.

These Conical Measures are very good for measuring small quantities of reagent. Moulded in Polypropylene, these autoclavable Measures have a hexagonal base which provides it excellent stability. The measures are clear, have good chemical resistance and have raised graduations for easy reading.

These four way connectors prove to be an excellent option for achieving leakproof joints in tubing connections.

These L shaped connector also add to the range of different connectors committed to provide excellent leakproof tube arrangement

These connectors add to the existing range of connectors. The crest & valley structure provided at all the ends of the connectors give excellent leakproof grip to the tube.

Made of Polypropylene, these Connectors are basically pipe-like structures in T & Y shapes with ringed edges. These are used for connecting tubes to each other. The edged prevent leakage & Slippage.

Polylab Coplin Jar made of Polypropylene can hold 10 slides of the size 1"x3" back to back. The interior of the Coplin Jar is grooved in a way to hold slides in erect position. Domed & shallow thread screw cap provides protection to the slides.

Polylab Cryo Boxes are moulded in Polycarbonate making it extra strong and autoclavable. These can be accomodate Cryo Vials of upto 4.5ml capacity and are designed to be used at temperatures ranging from -190°C to +121°C. The transparent cover of the box gives a good view of the contents inside and is numbered for better inventory control.

Moulded in Polypropylene, the top of the box is attached to the bottom through well designed built-in hinges. The bottom has built - in spaces to hold vials up to 2ml. capacity. Available in two different sizes, these autoclavable boxes bear alpha numeric index for easy identification of different vials placed inside.

These Coders available in different colours can easily fit into the cap of cryo vials for colour identification of different samples.

Polylab Cryo Rack is moulded in Polycarbonate making it tough, durable & autoclavable. This handy rack can hold 50 vials at a time. The unique feature of this rack is that vials can be unscrewed without actually picking them up as the vial will lock in every well and hence will not twist. This rack is provided with four anti skid rubbers & each well is identified with an alpha-numeric index.

Cryo Vials are normally used for storage of Biological material, human & animal cells at temperature as low as -190° C. These sterlized tubes are provided with white prominent graduations and a long marking area for sample identification. The cap of these vials is provided with a seal ring inside to make it completely leakproof. The longitudonal grooves in the base gives a non-twisting feature to these vials when placed in a cryo rack.

Adding to the existing range of Cryo Vials is this vial which has internal thread in it. The cap fitted with an O-ring screws in to the vial and makes it a leakproof Cryo Vial. These vials are provided with white, prominent graduations and a long marking area for sample identification.

These Crystal Model Sets contain different coloured jacks (Red, Black & White) & connectors (Long & Short) in a prescribed number to be joined together in an illustraded way to form structures like Diamond, Graphite & Sodium Chloride.

Plain Desiccators are physically the same as Vaccum Desiccator. Only difference is the absence of stop cock. Grease should be applied on the flanges to make it air tight. Both Vaccume & Plain Desiccators are provided with a thick perforated Polypropylene disc with a big hole in the centre for easy lifting. The tiny hles in the disc provide air troughs & support to the diswhes. However procelain discs are advisable in case of incandescent crucibles.

Polylab Desiccators are made of Polypropylene and Polycarbonate. These autoclavable vaccum desiccators can hold vaccum upto 740mm of Hg for 24 hrs. without any greasing. The top dome, moulded in rigid and transparent Polycarbonate, give a crystal clear view of the deciccant placed inside. The Knurled knob on the top provides easy handling of the dome. The lower part is made of Polypropylene. An internal groove is provided on the flange to hold a silicon rubber O-Ring. The Polypropylene stopcock is fitted with a self lubricating PTEE plug. This plug works three way i.e. vaccum creation, shutting off & vaccum releasing. Each Desiccator is provided with a thick perforated Polypropylene disc with a big hole in the centre for easy lifting. The tiny holes in the discprovide air troughs & support to the dishes. However porecelain discs are advisable in case of incandescent crucibles.

As the name suggests, this basket with wide net like structure on all sides prove really usefully for draining different laboratory apparatus after washing them. Made of polypropylene, this basket can be repeatedly autoclaved.

Polylab Draining Rack provides an excellent option for post wash draining of tubes & bottles in the laboratory. The back plate has 20 holes into which pegs are tightened with the help of screw nuts. Bottom of the rack is provided with a tray which collects all the waste water drained down which can further be collected in a container via drain tube. This rack does not rot, stain or rust.

Blown in Low Density Polyethylene, Polylab Dropping Bottles dispense small uniform drops of liquids when pressed lightly.

These Clamps are moulded in Polypropylene making it completely corrosion-proof. The spring loaded jack in the middle provides a vice like grip to the Burette and prevents it from slipping. Two tapered wedges are provided to ensure firm grip on rods having dia 1/2" or 3/8".

Moulded in Polypropylene, this Flask Stand gives a stair like top view. Every step provides execellent support to the round bottom flask at every point of contact. This Flask Stand can ho;d round bottom Flasks up to 10 Ltr. capacity. This Stackable Flask Stand can also be steam autoclaved.

Made of Polypropylene, these corrosion free funnel holders can hold funnels with dia 3" to 6". The extra plate provided can be placed to hold funnels bearing dia 1" to 3". Two tapered wedges are provided to ensure firm grip on Rods having dia 1/2" to 3/8".

These Long Stem funnels have smooth walls, 60° cone angle and external ribs to prevent air lock. Moulded in Polypropylene, these clear funnels can also be steam autoclaved.

This autoclavable bottle, made of polypropylene, has thick walls, is rugged & can be used for repeated applications of vaccum.

This Ice Bucket is made of a durable rigid material bearing excellent insultating properties. Contents can be stored in it using dry ice, liquid nitrogen or acetone etc.

Polylab ELISA/ASSAY plates are nmade of optical clear, non-toxic Polystyrene. These plates with 96U Bottom or flat bottom wells bear alpha-numeric index. Uniform placement of all the wells facilitate use of multi channel pipettes. These plates packed individually are available non-sterile as well as radiation sterilized.

Polylab Kipp's Apparatus made of Polyethylene has three main portions. The top portion is fitted with a thistle funnel and a bulb structure through which dilute funnel and a bulb structure through which dilute acid can be poured which reacts with a metal sulphate in the base of the Apparatus. Hydrogen Sulphide gas then evolved collects in the middle dome from where it can be released through a leakproof stopcock fitted with a self lubricating Poly Tetra Flouro Ethylene (PTFE) plug. The base is provided with a residual outlet fitted with a cap for easy cleaning.

Needless to say, Polylab Laboratory Tray moulded in Polypropylene is a multipurpose tray that can be used for sterlizing, drying glassware, porecelainware & other laboratory instruments. These steam autoclavable trays have tapered walls which prove good for nesting.

Magents Box is very often used in tissue culture & agricultural research experiments. Main body of this box is made of tough & transparent Polycarbonate which provides excellent view of the contents inside while the cover is made of Polypropylene. This autoclavable box is square in shape giving itself a space saving feature.

MCT Boxes are moulded in polycarbonate and are therefore strong as well as autoclavable. One size can hold 64 MCT's of 1.5ml & the other can hold 100 MCT's of 0.5ml. These boxes are designed to work at temperatures ranging from -190°C to +121° C. The transparent cover provides a good view of the contents inside & is numbered for better inventory control.

Polylab provides this Twin Purpose Rack for both 0.5ml & 1.5ml micro centrifuge tubes. Each side has 108 holes for 0.5ml & 1.5ml MCT's respectively. The transparent top provides an excellent view as well as a protection cover for the tubes stored. Each face for the base has a unique alpha-numeric index for easy identification of the tube.

Polylab measuring cylinders, moulded in Polypropylene, are single piece cylinders. These autoclavable cylinders have raised prominent graduations for easy reading and have excellent contact clarity. The broad base provides good stability.

Adding to the range of round & hexagonal base cylinders are the pentagonal ones. Polylab now offers you a wide ringe of cylinders with different bases to choose from. Prominently raised graduation &excellent contact clarity are among the other features of these cylinders.

Polylab measuring cylinders are now available with hexagonal base also. The hexagonal base provdes excellent stability to the cylinder where as teh tapered spout works really well while pouring any reagent.

These handy jugs, moulded in Polypropylene, are clear, autoclavable and have good chemical resistance. These jugs are provided with a handle for easy & convenient lifting and have raised graduations for easy reading.

Adding to the existing range of Polylab Jugs, these short form transparent jugs, made of polypropylene are autoclavable and have non-drip spout. These jugs have raised graduations, provide excellent contact clarity & are provided with excellent thumb grip on handle.

This double eneded pestle's one end fits 1.5ml. Micro centrifuge tube & the other one fits 0.5ml. Micro centrifuge tube.

These unique boxes are moulded in Polypropylene and are therefore autoclavable. The Box itself is clear providing an excellent view of the tipe inside while a table like structure is provided inside to hold the tips. The tip holding spaces are uniformaly placed to facilitate the use of multi channel pipettes. The cover is joined to the base through ball catcher hinges and provides excellent protection to the tips.

These unique boxes are moulded in Polypropylene and are therefore autoclavable. The Box itself is clear providing an excellent view of the tipe inside while a table like structure is provided inside to hold the tips. The tip holding spaces are uniformaly placed to facilitate the use of multi channel pipettes. The cover is joined to the base through ball catcher hinges and provides excellent protection to the tips.

This autoclavable bottle, made of polypropylene, can be used for storing & transfering chemicals and other reagents safe & sound

This stand as the name suggests is used for keeping nestler cylinders. Made of polypropylene, this stand is available in two sizes, one for 50ml nestler clinder & other for 100ml, nestler cylinder.

Oak Ridge Centrifuge Tubes, made of Polypropylene, have excellent contact clarity and can be used upto 50000xG. The screw cap is fitted with silicon O-Ring making it totally leakproof. These tubes should not be used below 4°C.

This Rack, as the name suggest, is used for keeping PCR Tubes. Top & base of this rack are made of tough & transparent polycarbonate while the middle portion is made of polypropylene. The tube holding spaces are uniformly placed so as to facilitate the use of multipipettes. A no. of racks can be sacked together to save shelf space.

These Polypropylene Petri Dishes are clear, unbreakable & autoclavable.

Newly added PS Petri Dish with fitting proves excellent for culture exp. Made in polystyrene, this transparent Petri Dish provides excellent inside view.

These transparent, ready to use, disposable Petri Dishes are made of optical clear, non-toxic, Polystyrene. These Petri Dishes packed individually in Polyethylene bags sterlized by radiation / E.T.O.

Made of polypropylene, this Pipette Box is designed is such a way that it can hold Pipettes of different lengths. The top of the box xcrews on the bottom and the height can be adjusted by screwing or unscrewing the top

Polylab presents a fast relese pipetting device for precise pipetting & zip-quick emptying. The Knurled thumbwheel can be rotated to draw up or dispense liquids while the releaser may be pushed in for zip-quick emptying. The moulded chuck has a silicon rubber collet inside to hold various pipette of standard sizes. It resists acids & alkalies and can be easily disassembled for through cleaning.

Moulded in Polypropylene, this unique stand holds a maximum of 94 pipettes and rotates on a central vertical axis for convenient selection of any particular pipette. The lower rotating disc has four concentric troughs with tapered sides and open bottoms which cradle the pipette tips protectively and permits water drops to runoff. The upper disc has a grid pattern concentric with the bottom disc and keeps the pipettes vertical. Liquids draining off the pipettes are retained on the top of the stationary base by the outer ring. This stand can be easily disassembled & reassembled.

This detachable Stand can hold 12 Pipettes, 6 on each side, in a horizontal position. Moulded in Polypropylene, this autoclavable stand has two sides which are attached to each other with three metallic rods coated with Polypropylene. This stand can be easily disassembbled for space saving storage.

This is a stable, non-corrosive, detachable Stand which can hold 28 pipettes with maximum dia 14mm. The heavy base measures 225mm in diameter and a Polypropylene coated square rod measuring 375mm in length is screwed into the base. The top disc that can be fixed on the rod has holes for holding pipettes while the lower one has pilot holes where the pipette tips rest and liquids drain down to the base. These discs can be adjusted on the rod according to the length of the pipette. The arrows provided on the discs should be kept parallel to ensure that corresponding holes are being centered.

Polylab Plantation Pots, moulded in polypropylene, are available in three different sizes. These pots have a downward extended rim which provide convenient lifting even if the pot is filled. The bottom of the pot is provided with holes for drain purpose.

These Troughs, made of Polypropylene, are autoclavable and are available in different sizes. These can be used for a wide range of purposes including storage, sterilizing & drying labware etc.

This, infact, is a multipurpose apparatus which works as a stirrer as well spatula. The fattened ends of this rod form two small spatulas.

These two-tier versatile racks, made of polypropylene, are autoclavable & can be used dry, in water baths or in freezers. These racks ar provided with alpha numeric index for easy sample identification. Racks are stack able even when loaded and have purpose designed lable spaces on each side.

Moulded in Polycarbonate, these autoclavable racks are made for holding 1.5ml. micro centrifuge tubes. These racks have a unique stacking feature which prevents movement in any direction. The holes are numbered & lettered for easy identification.

These Racks are clear acrylic construction with polycarbonate posts.69101 has a capacity to hold 60 petri dishes of 90 mm size while 69102 one can hold 56 petri dishes of 60mm. These racks are very useful during inoculation, incubation & Storage. Visibility from all sides enables the culture to be seen & checked during incubation.

These racks for scintillation vials, moulded in Polypropylene, are autoclavable & corrosion resistant. There ia an individual rack for both 8ml & 20ml vials. There rugged & stable racks can hold scintillation vials for convenient storage, handling & sample preperations.

These Narrow Mouth Reagent Bottles are available in Polypropylene as well as Polyethylene. The PP Bottles are rigid, translucent and have execellent contact clarity. These bottles can be autoclaved filled as well as empty. On the other hand, the Polyethylene bottles too have execellent strength and are unbreakable. The Polypropylene Cap has a built in seal ring to make these bottles leakproof.

These Wide Mouth Reagent Bottles are available in Polypropylene as well as Polyethylene. The PP Bottles are rigid, translucent and have execellent contact clarity. These bottles can be autoclaved filled as well as empty. On the other hand, the Polyethylene bottles too have execellent strength and are unbreakable. The Polypropylene Cap has a built in seal ring to make these bottles leakproof.

Moulded in Polypropyllen, this autocalvable Reagnet Reservoir is helpful for multi-channel pipetes to be used into microtiter plates.

These non-corrosive, moulded Retort Stands provide excellent replacement for the metal ones. Even the metallic rod has a polypropylene covering making it non-corrosive. The rod measuring 12.5mm x 750mm can be screwed into the heavy base giving way to a perfectly stable Retort Stand.

These Polypropylene / Polystyrene tubes are generally used in RIA, Coagulation & Becteriology. The Polyproplene tubes are clear and can withstand 3000 RCF during Centrifugation while the transparent Polystyrene tubes can withstand 1400 RCF. The PP tubes can accept common acids, alkalies and solvents at room temperature while the PS tubes can accept mild bases, weak acids but not organic solvants.

These polypropyle vials are unique because the cap fitted with an O ring can be screwed into the vial making it a leakproof vial which can be used in RIA, Coagulation & Bacteriology etc.

These unbreakable vials, moulded in Polyethylene, are fitted with leakproof screw caps. These vials can be used with standard counting equipment for liquid scintillation system and are excellent for low activity count.

This non-corrosive Seperatory Funnel Holder, moulded in Polypropylene, has a front opening which provides cleas view of the solution and allows unobstructed placement of sperating funnels. Two tapered wedges are provided to ensure firm grip on rods having dia 1/2" or 3/8".

Polylab Seperatory Funnel is made of Polypropylene, giving it excellent contact clarity and strength. This pear shaped, autoclavable seperating funnel has a leakproof threaded screw cap. The Polypropylene stopcock, fitted with a self lubricating PTFE plug, is push fitted to the stem of the seperatory funnel.

This sterile, smooth spreder enables even spreding of liquid samples across the surface of a jar plate without grouping & cutting the medium.

Simple Cell Pot, as the name suggests, is used for making Simple Cells & Voltmeters etc. Moulded in Polypropylene, this Pot has very good contact clarity and excellent chemical resistance. Being in Polypropylene, this Pot is much durablethan the one used conventionally.

These Slide Boxes are durable, compact & provide utmost protection to 1"x3" slides. Heavy walls will not wrap, splinter or crack. Boxes are unaffected by humidity and are throughly insect proof. Base of the slide box has a numbered index for easy slide Identification.

Slide Mailers present the best option to carry prepared slides from one place to another. Moulded in Polypropylene, these Slide Mailers are available in two sizes i.e. 2 slides and 5 slides.

Adding to the existing range of slide accessories, this slide storage rack made of ABS can hold 100 slides, recognizable through teh numeric indexing. Spacing between the slots provide adequate backward & forward movement of slides for convenient recognition. The transparent cover provide excellent view of the slides stored inside

This non-toxic disposable loop is accurate to semi quantitative stand for handling samples

Moulded in Polypropylene, Spatula consists of a spoon on one side while the other end is a flat construction with a knife edge. This edge is helpful in breaking up crystals of different salts while the spoon is used to draw salts from the containers.

These transparent Specimen Jars, used for preseving different specimnes in the lab are provided with a cap that fits in tight. These jars provided excellent protectin to the species preserved in it

Moulded in Polypropylene, this Staining Box helps in stainin, fixing, de-staining and handling fragile electrophoresis gels and membranes. Box as well as cover will resist temperatures from -70° C to +70 ° C. The LDPE plug provides leakproof seal and allows easy liquid drainage.

Made of polypropylene, these Stirrers are very useful for stirring different solutions in the laboratory. These Stirrers prove to be tough and long lasting.

These containers, as the name suggests, are used for collecting stool samples. The cap is provided with a spoon like sturcture that proves helpful in lifting samples.

In addition to the range the range of existing sample containers, this Stool Container has the unique feature of one piece moulded cap-spoon combination.

These polypropylene Stop Cocks are fitted with a Poly Tetra Flouro Ethylene (PTFE) plug & have serrated tubulations that accept from 6mm to 10mm tubing. These Stop Cocks are absolutely leakproof and are available in two different options i.e. 2 ways & 3 ways.

These Storage Boxes, made of Polypropylene, prove to be an excellent option for storage of different powdered reagents & other material in the laboratory. Square shape of these boxes halp in saving shelf space. Available in two different sizes, these boxes have polypropylene caps, are autoclavable, provide good chemical resistance & heavy duty service.

the name suggest, these vials are commonly used for storage of biological material, human & animal cells at temperature as low as -190°C. The Cap is provided with a built in seal ring making the vial leakproof. The base of the vial has longitudonal grooves which gives it a non-twisting character when placed in a vial rack.

Another addition to the range of storage vials is this vial which has iternal thread in it. The cap fitted with an O-ring screws n to the vial and makes it a leakproof storage vial.

This vial has an O-ring in the cap that makes it absolutely leakproof. Like other storage vials this vial can also be used for storage purposes at temperatures as low as -190°C.

These polyprolylene vials add to the existing range of Polylab storage vials. Available in 5ml & 10ml capacities, these vials have polypropylene cap with built in seal ring making it a leakproof vial. Just like others storage vials these vials are also used for the storage of biological material, animal & human cells etc.

Polylab Test Tube Baskets are made of Polypropylene. These autoclavable, unbreakable and non-corrosive Baskets are ideal for rinsing & draining glassware. These are also useful for storage of test tubes or culture tubes during sterlization or incubation.

This autoclavable Stand is perhaphs the most commonly used Test Tube Stand in various laboratories. For better visibility, this 6 place rack is end supported by 2 columns. The top plate has 2 holes for holding 25mm dia test tubes, four holes to hold 16mm dia tubes where as the base has corresponding hemispherical well. It also has six vertical pins fro drying tubes. Another option available in this section is a test tube stand in which all the holes in the top plates can hold 25mm dia tubes.

These ingenious racks with a 3-tier design provide clear view of the tube contents & convenient insertion & removal of tubes. The PC rack has transparent upper & middle plates where as in PP racks, every part is coloured & opaque. These autoclavable Racks can withstand sub-freezing temperatures.

A handy, little, space saver, this circular twelve place Polypropylene Test Tube Stand has four 25mm dia holes & eight 19mm dia holes in its top plate. The base has matching hemispherical wells & 16 verticalpins for drying tubes surrounded by a trough to catch drippings. This autoclavable rack can be easily disassembled for cleaning purpose.

An economical substitute for wire racks, here are these submersible, autoclavable racks which are stackable when empty. These are available in different colours and are made of a special blend of Polypropylene that makes it sink in a water bath and maintain their stability even in agitated water. These space saving racks can easily be disassembled for cleaning purpose. the base is in the form of a grid with square openings and fold up sides and end bars that lock into rack tops.

This transparent polypropylene cap for Test Tubes Proves to be an excellent protection to the contents to the tubes. The grooves inside the cap tighten the fitting on the tube while the outer groove wouldhold identification labels. The built in seal ring would set in the tube making the combination a leakproof one.

This rack is an excellent lab apparatus compatible with different sizes of tubes. Four sides of this rack can be used for tubes of ¢30mm, ¢20mm, ¢17mm & ¢12mm

This Universal Reagent Reservoir is a graduated single reagent reservoir with maximmum volume of 50ml, reservoir with 8 separate numbered 5ml. reagent channels & a reservoir with 12 separate numbered 5 ml. reagent channels. Made of polpropylene these reagent reservoirs are repeatedly autoclavable and can be used with all multi-channel pipettes.

These containers can be used for collecting a wide range of smaples of sputum, urine etc. Moulded in polypropylene these contianer have excellent contact clarity and the cap has built in seal that makes it completely leakproof

Adding to the already existing range of autoclavable laboratories trays, is the Utility Tray and as the name suggests this Polypropylene Tray can be utilized for purposes ranging from drying glassware to sterilizing and to store any laboratory apparatus.

Polylab Volumetric Flasks, blown in Polypropylene, are strong, unbreakable and have good contact clarity. These autoclavable flasks are provided with screw caps to prevent leakage.

Polylab Wash Bottles are made of Low Density Polyethylene which gives these bottles a translucent & unbreakable character. Solutions can be poured easily by sueezing the bottle lightly. The cap is fitted with a flexible polyethylene delivery tube which can be aimed wherever required.

These Bottles are also made of Low Density Polyethylene and are therefore translucent and unbreakable. The distinguishing feature that these bottles contains is the builtin delivery tube making it a one-piece Wash-Bottle. These Bottles are graduated on the outer surface to give an approximate idea about the volume of solution filled or dispensed.

This autoclavable bottle, made of polypropylene, can be used for storing & shipping chemicals & reagents. Being wide mouthed, it is always convenient to pour in & take out the reagents. The buil in depressions on two sides provide excellent grip while holding this bottle.

These wash bottles made of polyethylene have wide mouth that enables easy fillings as well as cleaning. The unique feature of the cap is through the top closure and stem moulded in one piece.